Buildrite FLEXICRETE Flexible Cementitious Waterproofing 2-Component, For Roof Deck, Firewalls 5kg

BUILDRITE FLEXICRETE is a two-component, flexible cementitious waterproofing membrane. It consists of selected cement blend with well-graded fillers and synthetic resin.

PACKAGE SIZE AND COVERAGE

• 5kg container can cover 2.85sqm (2 coats)Toilet and bathroom
• Roof deck and balcony that requires a topping

USES/AREA OF APPLICATION

• Toilet and bathroom
• Roof deck and balcony that requires a topping

CLIENT BENEFITS

• Flexible and durable
• No additional cement or water needed
• No need to measure - includes powder and liquid inside
• Rough finish - excellent adhesion to concrete toppings and tiles
• Excellent adhesion to most substrates
• Bridge hairline cracks
• Non-toxic
• Can be applied onto damp surface

INSTRUCTIONS FOR USE

SURFACE PREPARATION

• The substrates must be clean and sound, free of dust and loose particles. Cement laitance, oil, and grease, mold release agents must be removed from concrete surfaces by wire brushing, scabbling, or by other means.
• Dampen the substrates prior to application.
• Seal the corner joints using LEAK PLUG or corner tapes.

MIXING

• Prepare the slurry by pouring Part A (liquid) into a clean container. Add Part B (powder) slowly into the container while mixing with a slow-speed mechanical mixer until homogeneous and lump-free. Allow the mix to stand for 5 minutes and re-stir manually before use.

APPLICATION

For horizontal and vertical surfaces, a roller and/or paint brush may be used to apply the slurry. Care must be taken to ensure that air is not entrapped in the membrane.

Apply the first coat and work generously to fill all the pores and honeycombs.

Allow the membrane to dry for approximately 2 to 3 hours before application of the second coat. The second coat must be applied in a crosswise manner to ensure an even coverage.

Allow a minimum curing time interval of 15 to 72 hours before laying the screed or performing a ponding test.

Should the ponding test exceed 4 hours, a minimum curing time interval of 72 hours is recommended.

Concrete topping is recommended for exposed areas subject to regular traffic.

Apply a thin film of HARDCRETE FIX bonding agent before applying the concrete topping.