SAPAL is weather-resistant, water-based acrylic sealant and waterproofer for use as sealant and waterproofing membrane.
PACKAGE SIZE AND COVERAGE- 4L container can cover 56sqm per coat
USES/AREA OF APPLICATION
Firewalls
Exterior walls
Parapet walls
Canopy
Ledges
CLIENT BENEFITS
2 in 1 Solution - can be used as both a sealant to seal cracks and a water proofer for walls
Flexible
Crack resistant
UV & weather resistant
Paintable
Water-based
INSTRUCTIONS FOR USE
AS SEALANT
Clean and dry the surface before application. Remove all laitance, dust, oil, contaminants, and previous coating from the application area. Scrape off flaking paint and any loose material. Apply BLOCKOUT SAPAL 2 in 1 directly from the container using a spatula. Do not dilute with water.
AS WATERPROOFER
Clean and dry the surface before application. Remove all laitance, dust, oil contaminants, and previous coating from the substrate.
Allow new concrete to cure for a minimum of 28 days. Dilute 1 part of BLOCKOUT SAPAL 2 in 1 to half part water.
Mix thoroughly in a separate clean container. Apply BLOCKOUT SAPAL 2 in 1 with a brush or a roller over the substrate.
4L container can cover 56sqm per coat
3 coats to achieve the best result. Allow an undercoating interval of 2-3 hours.
Note: Do not use on damp or wet surfaces.
ESTIMATING GUIDE:
AS A SEALANT:
3.0 linear meters at 6.0 mm diameter
AS A PUTTY:
3 - 5 m2
per liter at 1 coat
AS WATERPROOFER:
14 m2
per liter at 1 coat
Note: The coverage rates provided above are for guidance purposes only. Actual usage may vary depending on the specific substrate conditions and application methods.
