Davies Liquid Tile® 100% Acrylic Solvent-Based Wall Coating System

DAVIES® Liquid Tile® Coating System is a specialty coating system formulated using today’s most advanced solvent acrylic technology. It offers best protection for all interior and exterior masonry and properly primed wood and metal surfaces.

RECOMMENDED SYSTEM

For walls - Concrete surfaces, properly primed wood and metal surfaces.

TECHNICAL DATA

Type : Acrylic Solvent Based

Finish : Flat, Sheen, Semi-gloss and Gloss Plain or Textured Finish

Color Range : White, Tint Bases for Pastel, Medium, Deep colors

Pack Sizes : 4 Liters and 16 Liters

Shelf life : One year when stored in dry and cool conditions

APPLICATION DATA

Application Tools : Brush / Roller / Spray

Thinning :

*Brush / Roller Application Dilute with not more than 10% DAVIES® DV-5-70 Liquid Tile® Reducer

*Spray Application Dilute with not more than 25% DAVIES® DV-5-70 Liquid Tile® Reducer

Recoating Interval : 2-3 hours

Drying Time : 2-3 hours

Clean-up : DAVIES® DV-5-70 Liquid Tile® Reducer

SURFACE PREPARATION

New Concrete

• All surfaces must be clean, dry, free from dust, dirt, chalk, laitance, efflorescence, rust, grease, oil and other foreign materials.
• Allow new concrete to cure and dry completely for at least 28 days with a moisture content of less than 15% and a Ph level below 10.
• To neutralize and remove efflorescence, treat surfaces with DAVIES® DV-100-X Concrete Neutralizer diluted with 16 parts water to 1 part DV-100-X. Apply by brush or mop to wet surface thoroughly and dry overnight. Rinse with water and dry. 

Previously Painted Concrete

• Remove mold and mildew growth with DAVIES® DV-500-X Mildewcide Wash Solution. Rinse with water, dry and immediately apply the recommended paint system to prevent regrowth of mold and mildew.
• For surfaces that exhibit severe chalk, apply one coat of DAVIES® DV-5-530 Liquid-Tile® Penetrating Sealer or DAVIES® DV-555 Concrete Clear Sealer.

PAINTING SYSTEM

Plain Finish

Textured Finish